Incredible Lessons I’ve Learned About

Undergoung Utilities and their Standard Colors

If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. You dont want something disastrous to occur. If you hit any of the underground utility lines while digging then you can be fatally injured. It can also interrupt services in your area where the line is located. People can call 811 to prevent these incidents, before they proceed with digging their property. Calling the 811 number will enable utility companies to come out and mark their respective utility lines.

But, despite the marks, there will sill be accidents. Utility lines are struck every 6 minutes, some place. When utility lines are stuck it causes disturbances in traffic lights wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

GPR or Ground Penetrating Radar is used by companies to locate their utility lines. When locating utility lines underground, this machine makes it easy to do so. Calling 811 is enough for the property owner to let companies located their lines.

Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.

White lines are for proposed excavation sites. It locates areas that will be excavated in the near future.

If you see pink lines, they are temporary survey markings. These are used by surveyors to mark off legal property boundaries.

Red lines are used to mark electric power lines, cable, conduit, and lighting cable. The color red is perfect for electric works because it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.

Orange lines are used for communication, alarm, signal lines, cable or conduit. Blue lines are used for potable water. Reclaimed water, irrigation, and slurry lines used purple lines. If you see the color green, then it indicates sewer and drain lines. You can derail any project for a long time if you hit these lines.

You can learn more about the color coding of utility lines if you click here now! Click here for more.