If you find underground utilities, you can easily determine what type of utility it is for. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. Although not completely eliminated, risks today have been reduced. If there is a need to dig the ground, it is very important that the utility lines first be identified. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. It is to prevent disaster. The worst thing that can happen if lines are not identified is that fatal injuries can happen. The location of the areas where the lines were struck can experience service interruption. People can call 811 to prevent these incidents, before they proceed with digging their property. When the number is called, you can let the utility companies come out and mark their respective lines.
But, despite the marks, there will sill be accidents. The reality is that there is an incident almost every 6 minutes where utility line are struck. Traffic lights, wastewater pipes, telecommunication lines, etc. are affected when lines are struck. This is then something that affects public health and safety.
GPR or Ground Penetrating Radar is used by companies to locate their utility lines. When locating utility lines underground, this machine makes it easy to do so. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.
Today, utility lines are marked with different colors for easy identification. The colors below indicate the kind of utility uses it.
Proposed excavation sites use white lines. Area that will be excavated in the future are marked.
Temporary survey markings use pink lines. Surveyors use pink lines to mark off legal property boundaries.
If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is associated with fire and danger so it is just appropriate to use it for electrical works.
Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Natural gas leaks can create potentially disastrous situations and this is why it is appropriate to use the bright yellow color.
Communication, alarm, signal lines, cable, or conduit use orange lines. Blue lines are used for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. Green lines are used for sewer and drain lines. You can derail any project for a long time if you hit these lines.
If you want to learn more about utility lines click here now! You can view here for more.